TechieStuff: 

            Follow @RainerBemsel

PowerRail CLI Summary

When dealing with Packet Engine's Power Rail I made myself a CLI summary on my Palmtop for Quick Reference. With my Technology Basics page, I thought it might be good to access, whenever I need them.

--- ARP Commands ---

  • arp timeout <seconds>
  • arp proxy {enable / disable}

--- BootP Commands ---

  • bootp maxhops <number>
  • bootp minsec <value>
  • bootp mode {bootp / dhcp / both / off}
  • bootp relay <index> interface <ipaddr>
  • bootp relay <index> server <ipaddr>

--- Bridge Commands ---

  • bridge show
  • bridge forward-time <1/100 seconds>
  • bridge hello-time <1/100 seconds>
  • bridge max-age <1/100 seconds>
  • bridge priority <value>
  • bridge stp stats {show / help /<variable>
  • bridge stp status {enable / disable}

--- DVMRP Commands ---

  • dvmrp debug <value>
  • dvmrp flash-interval <seconds>
  • dvmrp fwd [src addr] [group addr] show
  • dvmrp graft-timeout <seconds>
  • dvmrp grafts-sent [src addr] [group addr] show
  • dvmrp neighbor-interval <seconds>
  • dvmrp neighbor-timeout <seconds>
  • dvmrp prune-lifetime <seconds>
  • dvmrp prunes-recv [src addr] [group addr] [nbr addr] show
  • dvmrp prunes-sent [src addr] [group addr] show
  • dvmrp prune-timeout <seconds>
  • dvmrp report-interval <seconds>
  • dvmrp route [ipaddr] [mask] show
  • dvmrp route-timeout <seconds>
  • dvmrp route-holddown <seconds>
  • dvmrp status {enable / disable}

--- FDDI Commands ---

  • fddi <slotnum> <channel> bridge stats {show / help / <variable>
  • fddi <slotnum> <channel> bridge stp path-cost <value>
  • fddi <slotnum> <channel> bridge stp status {enable / disable}
  • fddi <slotnum> <channel> cf-state show
  • fddi <slot> <channel> encap-ipx {snap /etype}
  • fddi <slot> <channel> factory-defaults enable
  • fddi <slot> <channel> fragmentation {enable / disable}
  • fddi <slot> <channel> jumbo-capable show
  • fddi <slot> <channel> localid <id>
  • fddi <slot> <channel> maxrequests <num>
  • fddi <slot> <channel> smt show
  • fddi <slot> <channel> smt tnofify <seconds>
  • fddi <slot> <channel> smt userdata <name>
  • fddi <slot> <channel>smt path {primary /secondary} show
  • fddi <slot> <channel> smt path {primary / secndary} tmaxmin <nanoseconds>
  • fddi <slot> <channel> smt path {primary / secndary} treqmax <nanoseconds>
  • fddi <slot> <channel> smt path {primary / secndary} tvxmin <nanoseconds>
  • fddi <slot> <channel> smt path {port-a /port-b} show
  • fddi <slot> <channel> smt path {port-a /port-b} leralarm <value>
  • fddi <slot> <channel> smt path {port-a /port-b} lercutoff <value>
  • fddi <slot> <channel> stationid show
  • fddi <slot> <channel> stats {show / help/ <variable>
  • fddi <slot> <channel> status {enable /disable}
  • fddi <slot> <channel> translate802-1h {enable / disable}
  • fddi <slot> <channel> type-code <hexnum>

--- Generic Protocol Commands ---

  • generic-protocol <number> ethertype <hexnum> name <string>
  • generic-protocol <number> ethertype <hexnum>
  • generic-protocol <number> name <string>

--- IP Commands ---

  • ip default-gateway <ipaddr>
  • ip icmp-stats {show / help /<variable}
  • ip interface [vlan id> <ipaddr>] show
  • ip ospf area <areaid> {create / delete}
  • ip ospf area <areaid> default-metric <tos> {create / delete}
  • ip ospf area <areaid> default-metric <tos> cost <value>
  • ip ospf area <areaid> range <summary / nssa> <ipaddr> <mask> {create / delete}
  • ip ospf area <areaid> range >summary / nssa> <ipaddr> <mask> effect {adMatching / noMatching}
  • ip ospf area <areaid> stub {enable / disable}
  • ip ospf area <areaid> summary {enable / disable}
  • ip ospf asbr {enable / disable}
  • ip ospfborder-routers <areaid> <router-id> <tos> <gateway> show
  • ip ospf ext-lsa [limit / count /checksum] show
  • ip ospf ext-lsdb [rtr /net / netsum /asbrsum /asext] [<lsdi> / <router-id>] [sequence] [age] [checksum] show
  • ip ospf host <ipaddr> <tos> {create / delete}
  • ip ospf host <ipaddr> <tos> metric <value
  • ip ospf interface [<ipaddr> show
  • ip ospf interface-authentication [<ipaddr>] show
  • ip ospf interface-metric [<ipaddr> <tos>] show
  • ip ospf interface-timers [<ipaddr>] show
  • ip ospf log-status {enable / disable}
  • ip ospf log-type {error/warning/state/recv/send/flood/spf/lsdb/rdb/age/vlink/redist/summary/dbexch} [enable /disable}
  • ip ospf log-type {error/warning/state/recv/send/flood/spf/lsdb/rdb/age/vlink/redist/summary/dbexch} <value>
  • ip ospf lsdb [<areaid>] [rtr / net / netsum / asbrsum /asext] [<lsid>] [<routerid>] [sequence]
  • ip ospf mtu-check {enable / disable}
  • ip ospf neighbor [<ipaddr>] show
  • ip ospf restribution {other / local / directhost / static / rip / bgp} {create / delete}
  • ip ospf restribution {other / local / directhost / static / rip / bgp} metric <value>
  • ip ospf restribution {other / local / directhost / static / rip / bgp} metric-type {type1 / type2}
  • ip ospf restribution {other / local / directhost / static / rip / bgp} subnets {enalbe /disable}
  • ip ospf route <ipaddr> <mask> <tos> <gateway> show
  • ip ospf router <routerid>
  • ip ospf route-tag <value>
  • ip ospf spf-time [delay <value>] [hold <value>]
  • ip ospf status {enable / disable}
  • ip ospf virtual-link <areaid> <routerid> {create / delete}
  • ip ospf virtual-link <areaid> <routerid> auth-key <key string>
  • ip ospf virtual-link <areaid> <routerid> auth-type {none / simple}
  • ip ospf virtual-link <areaid> <routerid> dead-interval <value>
  • ip ospf virtual-link <areaid> <routerid> hello-intervall <value>
  • ip ospf virtual-link <areaid> <routerid> retrans-interval <value>
  • ip ospf virtual-link <areaid> <routerid> transit-delay <value>
  • ip ospf virutal-neighbor [<areaid> <routerid>] show
  • ip primary-address >ipaddr>
  • ip rdp status {enable / disable}
  • ip rip force-holddowntimer <value>
  • ip rip interface [<ipaddrss>] show
  • ip rip redistribution {static / ospf} [create /delete}
  • ip rip redistribution {static / ospf} metric <value>
  • ip rip redist-status
  • ip rip route-tag <value>
  • ip rip status {enable / disable}
  • ip route [<ipaddr> <mask> <tos> <gateway>] show
  • ip route-policy <ipaddr> <mask> <tos> {create /delete}
  • ip route-policy <ipaddr> <mask> <tos> accounting <value>
  • ip route-policy <ipaddr> <mask> <tos> pri <value>
  • ip route-policy <ipaddr> <mask> <tos> qos-mode {normal /pre-map / priority-stamp /prec-stamp}
  • ip routing {enable / disable}
  • ip snmp {show / help / <variable>
  • ip snmp traphost <ipaddr> {community <comm string> create / delete}
  • ip snmp traphost <ipaddr> community <comm string>
  • ip snmp write-community <comm string>
  • ip static-route <ipaddr> <mask> <tos> <gateway> {create / delete}
  • ip static-route <ipaddr> <mask> <tos> <gateway> cost <value>
  • ip subnet-broadcast {enable /disable}

--- IPX Commands ---

  • ipx hw-routing {enalbe /disable}
  • ipx interface {<vlan id>] [etype / llc /snamp / raw] show
  • ipx rip interface {<vlan id>] [etype / llc /snamp / raw] show
  • ipx rip max-paths <value>
  • ipx rip stats {show / help / <variable>}
  • ipx rip status {enable / disable}
  • ipx route [<net-num>] show
  • ipx sap service [<type>] [<name>] show
  • ipx sap status {enable / disable}
  • ipx static-route <net-num> {nextvlan <vlan id> nextencap <encap> nextnode <node> create / delete}
  • ipx static-route <net-num> hops <hopcount>
  • ipx static-route <net-num> nextencap {ethyp / llc / snap / raw}
  • ipx static-route <net-num> netnode <macaddr>
  • ipx static-route <net-num> nextvlan <vlan id>
  • ipx static-route <net-num> ticks >numtick>
  • ipx stats {show / help / <variable>}
  • ipx status {enable / disable}
  • ipx sw-fwd show
  • ipx sysencap {etype / llc / snap /raw}

--- Multicast Containment Commands ---

  • mcon status {enable / disable}
  • mcon router-timeout <value>

--- Multicast Forwarding Cache Commands ---

  • mfc agetime <value>
  • mfc tagmode {enable / disable}

--- Ethernet Port Commands (Power Rail 5200 and 2200 only) ---

  • ethernet <slotnum> <portnum> autoneg {enable / disable)
  • ethernet <slotnum> <portnum> bridge stp path-cost <value>
  • ethernet <slotnum> <portnum> bridge stp status {enable /disable}
  • ethernet <slotnum> <portnum> duplex {half / full}
  • ethernet <slotnum> <portnum> flow {enable / disable}
  • ethernet <slotnum> <portnum> frag-type {none/ raw/ipAndRaw /ipDnfDiscard/ipDnfIcmp/ipDnfOverride/useGlobal}
  • ethernet <slotnum> <portnum> jumbo-capable show
  • ethernet <slotnum> <portnum> linkstat show
  • ethernet <slotnum> <portnum> mirror-mode {egress / ingress}
  • ethernet <slotnum> <portnum> mirror-mode {enable / disable}
  • ethernet <slotnum> <portnum> priority <value>
  • ethernet <slotnum> <portnum> reassembly-mode {none /ipAndRaw(useGlobal}
  • ethernet <slotnum> <portnum> speed {10 / 100}
  • ethernet <slotnum> <portnum> stats {show / help / <variable>}

--- Ethernet Port Commands (Power Rail 1000 only) ---

  • ethernet <portnum> autoneg {enable / disable}
  • ethernet <portnum> bridge stp path-cost <value>
  • ethernet <portnum> bridge stp status {enable / disable}
  • ethernet <portnum> duplex {half / full}
  • ethernet <portnum> flow {enable / disable}
  • ethernet <portnum> linkstat show
  • ethernet <portnum> mirror-mode {egress / ingress}
  • ethernet <portnum> mirror-mode {enable / disable}
  • ethernet <portnum> priority <value>
  • ethernet <portnum> speed {10 / 100}
  • ethernet <portnum> stats {show /help / <variable}
  • ethernet <portnum> status {enable / disable}
  • ethernet <portnum> tagmode {enable / disable}

--- Gigabit Port Commands (Power Rail 5200 and 2200 only) ---

  • gigabit <slotnum> <portnum> bridge stp path-cost <value>
  • gigabit <slotnum> <portnum> bridge stp status {enable /disable}
  • gigabit <slotnum> <portnum> flow {enable / disable}
  • gigabit <slotnum> <portnum> frag-type {none/ raw/ipAndRaw /ipDnfDiscard/ipDnfIcmp/ipDnfOverride/useGlobal}
  • gigabit <slotnum> <portnum> jumbo-capable show
  • gigabit <slotnum> <portnum> linkstat show
  • gigabit <slotnum> <portnum> mirror-mode {egress / ingress}
  • gigabit <slotnum> <portnum> mirror-mode {enable / disable}
  • gigabit <slotnum> <portnum> priority <value>
  • gigabit <slotnum> <portnum> reassembly-mode {none /ipAndRaw(useGlobal}
  • gigabit <slotnum> <portnum> stats {show / help / <variable>}

--- Gigabit Port Commands (Power Rail 1000 only) ---

  • gigabit <portnum> bridge stp path-cost <value>
  • gigabit <portnum> bridge stp status {enable / disable}
  • gigabit <portnum> flow {enable / disable}
  • gigabit <portnum> linkstat show
  • gigabit <portnum> mirror-mode {egress / ingress}
  • gigabit <portnum> mirror-mode {enable / disable}
  • gigabit <portnum> priority <value>
  • gigabit <portnum> stats {show /help / <variable}
  • gigabit <portnum> status {enable / disable}
  • gigabit <portnum> tagmode {enable / disable}

--- Port Mirror Commands (Power Rail 5200 and 2200 only) ---

  • port-mirror copy-caps [slotnum] [portnum] show
  • port-mirror map <srcPort> <destSlot> <destPort> {create / delete}
  • port-mirror settings <slotnum> <portnum> mode {egress / ingress}
  • port-mirror settings <slotnum> <portnum> status {enable / disable}

--- Port Mirror Commands (Power Rail 1000 only) ---

  • port-mirror copy-caps {ethernet / gigabit} [portnum] show
  • port-mirror map {ethernet / gigabit} srcPort {ethernet / gigabit} <destPort> {create / delete}
  • port mirror settings {ethernet / gigabit} <portnum> mode {egress / ingress}
  • port mirror settings {ethernet / gigabit} <portnum> mode {enable / disable}

--- POS Commands (Power Rail 5200 and 2200 only) ---

  • pos <slotnum> <portnum> crc {crc16 / crc32}
  • pos <slotnum> <portnum> framint {sonet / sdh}
  • pos <slotnum> <portnum> internal-clock {enable / disable}
  • pos <slotnum> <portnum> jumbo-capable show
  • pos <slotnum> <portnum> linkstat show
  • pos <slotnum> <portnum> loop-line {enable / disable}
  • pos <slotnum> <portnum> mac-address show
  • pos <slotnum> <portnum> mtu-size show
  • pos <slotnum> <portnum> priority <value>
  • pos <slotnum> <portnum> scamble-atm {enable / disable}
  • pos <slotnum> <portnum> stats {show / help / variable}
  • pos <slotnum> <portnum> status {enable / disable}
  • pos <slotnum> <portnum> tagmode {enable / disable}

--- RMON Commands ---

  • rmon slot <slotnum> port <portnum> {show / help / <variable>
  • rmon ethernet <portnum> {show / help / <variable>
  • rmon gigabit <portnum> {show / help / <variable>
  • rmon status {enable / disable}

--- Slot Commands (Power Rail 5200 and 2200 only) ---

  • slot <number> {enable / disable}
  • slot <number> card-type show
  • slot <number> image-version show

--- System Commands ---

  • system show
  • system back-card [<slot-num>] show
  • system contact <text string>
  • system diags {enable / disable}
  • system environment fan <fan-num>show
  • system environment power <power-supply-num> show
  • system environment temperature <sensor-num> show
  • system jumbo frag-type {none / raw / ipAndRaw / ipDnfDiscard / ipDnfIcmp / ipDnfOverride
  • system jumbo ipfrag-size <value>
  • system jumbo jumbp-caps show
  • system jumbo max-mtu <value>
  • system jumbo reassembly-mode {none / ipAndRaw}
  • system location <text string>
  • system log [num-entries / oldest-entry / newest-entry / event [number]] show
  • system log clear
  • system log mask <value>
  • system log tram-mask <value>
  • system name <text string>
  • system syslog debug {enable / disable}
  • system syslog primary <ipaddr>
  • system syslog secondary <ipaddr>
  • system syslog status {enable / disable}

--- Trunk Commands ---

  • trunk <num> {create / delete}
  • trunk <num> name <string>
  • trunk <num> slot <slotnum> port <portnum> {add / delete}
  • trunk <num> {gigabitl / ethernet} <portnum> {add / delete}

--- VLAN Commands ---

  • vlan <vlan id> {tag <tagvalue> create / delete /enable /disable}
  • vlan <vlan id> arp <ipaddr> {macaddr <macaddr> / delete}
  • vlan <vlan id> bcast-priority {default / 0-7}
  • vlan <vlan id> bridge agetime <value>
  • vlan <vlan id> dvmrp flooding-status {enable / disable}
  • vlan <vlan id> dvmrp metric <value>
  • vlan <vlan id> dvmrp neighbor show
  • vlan <vlan id> dvmrp neighbor-timeout <seconds>
  • vlan <vlan id> dvmrp prune-lifetime <seconds>
  • vlan <vlan id> dvmrp report-timeout <seconds>
  • vlan <vlan id> dvmrp status {enable / disable}
  • vlan <vlan id> dvmrp suppress-routes {enable / disable}
  • vlan <vlan id> fdb [<maccaddr>] show
  • vlan <vlan id> flood-priority {default / 0-7}
  • vlan <vlan id> igmp interval <value>
  • vlan <vlan id> igmp lastqueryinterval <value>
  • vlan <vlan id> igmp maxresp <value>
  • vlan <vlan id> igmp membership [dynamic] [<ipaddr>] show
  • vlan <vlan id> igmp membership {static / dynamic} <ipaddr> uptime show
  • vlan <vlan id> igmp robustvar <value>
  • vlan <vlan id> igmp status {enable / disable}
  • vlan <vlan id> igmp time-remaining <value>
  • vlan <vlan id> igmp version {v1 / v2}
  • vlan <vlan id> igmp wrongversions show
  • vlan <vlan id> ip <ipaddr> {mask <ipaddr> create / delete}
  • vlan <vlan id> ip <ipaddr> broadcast <ipaddr> {enable / disable}
  • vlan <vlan id> ip <ipaddrs> encap show
  • vlan <vlan id> ip <ipaddrs> ospf area <areaid>
  • vlan <vlan id> ip <ipaddrs> ospf auth-key <key string>
  • vlan <vlan id> ip <ipaddrs> ospf dead-interval <value>
  • vlan <vlan id> ip <ipaddrs> ospf hello-interval <value>
  • vlan <vlan id> ip <ipaddrs> ospf metric cost <value>
  • vlan <vlan id> ip <ipaddrs> ospf poll-interval <value>
  • vlan <vlan id> ip <ipaddrs> ospf priority <value>
  • vlan <vlan id> ip <ipaddrs> ospf retrans-interval <value>
  • vlan <vlan id> ip <ipaddrs> ospf status {enable / disable}
  • vlan <vlan id> ip <ipaddrs> ospf transit-delay <value>
  • vlan <vlan id> ip <ipaddrs> rdp address show
  • vlan <vlan id> ip <ipaddrs> rdp adstatus {enable ( disable}
  • vlan <vlan id> ip <ipaddrs> rdp lifetime <value>
  • vlan <vlan id> ip <ipaddrs> rdp maxinterval <value>
  • vlan <vlan id> ip <ipaddrs> rdp mininterval <value>
  • vlan <vlan id> ip <ipaddrs> rdp multicast {enable / disable}
  • vlan <vlan id> ip <ipaddrs> rdp preference <value>
  • vlan <vlan id> ip <ipaddrs> rip auth-key <16byte key string>
  • vlan <vlan id> ip <ipaddrs> rip auth-type {none / simple}
  • vlan <vlan id> ip <ipaddrs> rip metric <1-15>
  • vlan <vlan id> ip <ipaddrs> rip recv-version {v1 / v2 / both / noreceive}
  • vlan <vlan id> ip <ipaddrs> rip send-version {v1 / v2 / v1compatible /nosend}
  • vlan <vlan id> ip <ipaddrs> rip status {enable / disable}
  • vlan <vlan id> ipx <encap> {network <net-num> create / delete}
  • vlan <vlan id> ipx <encap> network <net-num> nbfwd {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num>
  • vlan <vlan id> ipx <encap> network <net-num> rip age <multiplier>
  • vlan <vlan id> ipx <encap> network <net-num> rip gap <msec>
  • vlan <vlan id> ipx <encap> network <net-num> rip interval <seconds>
  • vlan <vlan id> ipx <encap> network <net-num> rip size <max packets>
  • vlan <vlan id> ipx <encap> network <net-num> rip split {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num> rip status {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num> rip ticks <numticks>
  • vlan <vlan id> ipx <encap> network <net-num> sap age <multiplier>
  • vlan <vlan id> ipx <encap> network <net-num> sap gap <msec>
  • vlan <vlan id> ipx <encap> network <net-num> sap gns-delay <msec>
  • vlan <vlan id> ipx <encap> network <net-num> sap gns-reply {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num> sap interval <seconds>
  • vlan <vlan id> ipx <encap> network <net-num> sap size <max packets>
  • vlan <vlan id> ipx <encap> network <net-num> sap status {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num> sap split {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num> size <max packet> {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num> status {enable / disable}
  • vlan <vlan id> ipx <encap> network <net-num> type show
  • vlan <vlan id> mac <macaddr> {slot <number> port <number> {dynamic / static / permanent} / delete}
  • vlan <vlan id> mac <macaddr> {{gigabit / ethernet} <portnumber> {dynamic / static / permanent} / delete}
  • vlan <vlan id> mcon source <ipaddr>
  • vlan <vlan id> mcon status {enable / disable}
  • vlan <vlan id> member <slotnum> <portnum> {default / ip /ipx / appletalk /gen1...gen8} {add / delete}
  • vlan <vlan id> {ethernet-member / gig-member} <port-num> {default / ip / ipx / appletalk / gen1...gen8} {add/delete}
  • vlan <vlan id> name <string>
  • vlan <vlan id> priority {default / 0-7>}

--- Utilities Commands ---

  • utils access-control <ipaddr> <mask> <slot> <port> {create / delete}
  • utils access-control <ipaddr> <mask> {0 / gigabit / ethernet} <port> {create / delete}
  • utils access-control <ipaddr> <mask> <slot> port> snmp-access {deny / reject / readonly /read-write}
  • utils access-control <ipaddr> <mask> {0 / gigabit / ethernet} <port> snmp-access {deny / read /read-only /read-write}
  • utils access-control <ipaddr> <mask> <slot> <port> telnet-access {deny / reject / permit}
  • utils access-control <ipaddr> <mask> {0 / gigabilt /ethernet} <port> telnet-access {deny / reject / permit}
  • utils banner {enable / disable}
  • utils clock <yyyymmdd> <hhmm[ss]>
  • utils contimeout <seconds>
  • utils defconfig <filename>
  • utils file copy <srcfile> <destfile>
  • utils file delete <file>
  • utils file dir [<device> / <file>]
  • utils file format <device>
  • utils file install <srcfile> <destfile>
  • utils file rename <file> <newfile>
  • utils file rename <filename> <newfilename>
  • utils file save [<file>]
  • utils more {on / off}
  • utils prompt <value>
  • utils reboot <value>
  • utils telnet numsessions <number>
  • utils telnet timeout <seconds>
  • utils tftp {get / put} <filename>
  • utils tftp remote-server <ipaddr>
  • utils tftp status {enable / disable}
  • utils user <userName> auth-leber {write / read-only}
  • utils user passwd [<userName>]
  • utils user radius retries <value>
  • utils user radius primary-server <ipaddr>
  • utils user radius second-server <ipaddr>
  • utils user radius secret
  • utils user radius status {enable / disable}
  • utils user radius timeout <value>
  • utils user radius udp-port <port>
  • utils user <userName> type {local / radius}
  • utils user unconfigured {disallow / radius}

Above CLI Commands are based on v. 2.5. With 3.0, some of the commands, especially the ones with "show" will also work the "Cisco Way", where show is in the front of the complete command line.